Wednesday 11 January 2017

A raised bottom box tutorial DMMDT


This was my Design Team contribution for DecoArt last October and thought it was about time I shared it here for you.
This is a shadow box I designed using greyboard and I placed the 'base' inside the box so that I could use one of two depths for my project (See dimensions below). If you ever want a box and have some greyboard to work with I go through the dimensions and process steps below.



Step 1 - Create the Shadowbox

1a. Cut two pieces of greyboard 18 x 4 cms and cut another two 13 1/2 x 4 cms to make up the sides.
Cut two more pieces 17 1/2 x 1 1/2 cms and another two 13 x 1 1/2 cms to provide the inside 'step' on which to place the base.
Use artist tape or another thin tape to hold the four sides of the box together, add one layer of tape on the top inside of the box as well as the whole of the outside, layering it if necessary.


1b. Adhere the four thin strips to the inside of the box on the bottom edge (these will form the ridges underneath for the background to sit on).


1c. When they are dry place the base onto the strips to form the background of your box.


1d. Cover the outside and inner panels with tissue wrap and  here you can see the dimensions of the base top and bottom.



Step 2 - Colour Mixing


Usually I just have drops of paint on my craft mat and blend colours as I go along but there are times when I want a specific colour palette and I will do myself a colour mixing chart. Pinterest is a great place to find new palettes to use and then I create one of these. The soft weathered blue that just happened on the alabaster technique below was my starting point and the colour palette that inspired me can be found at http://snapyourcolors.com/Chip/l4T5fR/


Step 3 - The background


3a. Cut a piece of card to fit the base (the size will differ according to which depth you choose to use).
Cover it with tissue wrap to fit in with the sides of the box and then use modeling paste and stencils to add texture.
Choose your paints, mix the blends of colours one at a time and then spritz, drip and dribble them through the texture drying before you add the next colour.
Lightly brayer some white back over the texture.

3b. Whilst completing this step and having mixed each of the colours I finger painted some on the outside and inner lip of the box frame.



Step 4 - The Cameo Frame


4a. Die-cut the frame from grey board and give it a coat of white gesso painting in all directions to get it as smooth as possible.
4b. Drag some texture sand paste over and dry.
4c. Use a wet sea sponge with Titan Buff and medium grey V6 and sponge on random areas of both colours.
4d. Mix three parts resin plaster with one part water and a little titan buff to colour it, pour on frame and drag over 90% of it pressing in with a palette knife and quickly add the smallest spot of prussian blue hue, a drop of the medium grey and a few drops of titanium white, mix together and also drag that across to create an alabaster background.
4e. When dry, rub off any loose surface material and seal with ultra matte varnish, which gets soaked up by the plaster very quickly. Repeat with a second coat when the first has dried out.

Step 5 - The Shadow Box border

5a. On a piece of card paint prussian blue and titan buff, dry it and then layer on a watery wash of prussian blue and dry.


5b. Die cut an ornate border, ink the edges with ground espresso and adhere to the sides with decou-page.



Step 6 - The Embellishments

6a. This is a free image from the internet, printed on photo paper and adhered to an mdf circle. I like to sand the edges and blend brown distress inks around it.


6b. This is a resin cast from a prima mould, painted with the prussian blue and titan buff mixed together and when dry I spritzed it with water and dripped some titanium white over it. Again when dry I highlighted the raised parts by rubbing on some iced espresso metallic lustre.


6c. These metal corners and handle were just spritzed with water with some titanium white dripped and dried. Again I highlighted with iced espresso metallic lustre.


6d. The metallic book plate and nib were given dabs of titanium white, paynes grey and quinacridone gold in separate layers, drying between each and highlighted with champagne ice metallic lustre.


6e. This is a number cut from card that had been embossed. I spritzed it with water, dribbled paynes grey and prussian blue over it. Once dry I blended titanium white over the raised areas using the back of a piece of cut and dry foam,dried it, then gave it a watery wash of quinacridone gold.



Step 7 - Assembly

7a. First glue the number onto the metal plate, then adhere it to the bottom of the cameo frame.


7b. Glue to photo onto the frame and make sure both are dry before the next step. (otherwise they might move a fraction while you are gluing other pieces on - said with experience!!!).
7c. Attach the mould to the top of the cameo frame.


7d. When these three are all completely dry use foam pads behind the frame and the part of the mould that is sticking over the edge and fix to the back of the box. The foam pads add great dimension.
7e. Use modeling paste behind the nib to attach it to the background.
7f. Glue the corners on and again leave it all to dry.


7g. Lastly you can put the frame upright and glue the handle to the top.


Hope you enjoyed seeing how this came together, especially if you missed it last year on the DecoArt blog. I can feel me wanting to have another go at one of these soon.


18 comments:

froebelsternchen said...

So so beautiful and thank you so much for the tutorial as well Brenda!
oxo Susi

Nikki Acton said...

Wonderful design and tutorial. As always love all the details and amazing paint effects you achieve xx

Jane said...

Wow Brenda what a work of art this it. So many gorgeous colours and effects. Your step by step is brilliant too thanks so much for sharing it here. Happy Wednesday my friend and I hope you are well? Hugs xxx

Astrid Maclean said...

I remember this well from the Decoart blog Brenda.... the detail is just incredible and what an amazing tutorial!! So many things to LOVE about this piece, I do think it is one of my all time favourites that has the complete wow factor! I would love to see it irl, I bet there is still much more to it than can be seen from the photos...

Gina said...

WOW...you truly are the "Mistress of Rusty Grunge" :D XXX

Patty O'Malley said...

Fantastic project, Brenda! Love the details!

Valerija said...

Amazing project Brenda. This is really great job!
Valerija xx

Terry said...

Brenda, I sure do miss visiting your blog! What a fantastic project with so many grungy details. I have a few of those handles in my stash (somewhere---still unpacking) and wondered if we bought those together on one of you CA adventures? Hope you are enjoying the start of 2017! Hugs!

Redanne said...

I remember this gorgeous creation Brenda, I was completely blown away by it - you have such a wonderful ability to make something new look properly vintage and extremely beautiful all at the same time! Love this!! Congratulations too on staying with the DecoArt Team, they must count their blessings every day to have you on board! Hugs, Anne xx

SewPaperPaint said...

This is phenomenal Brenda, particularly the number tile! How amazing!!! I'm totally in love. Hugs, Autumn

rachel said...

stunning work Brenda and great steps too - thankyou lovely lady! Hugs rachel xx

Meggymay said...

Its a beautiful project Brenda and a super details step by step.
Yvonne xx

Jackie PN said...

Beautiful and way cool Brenda! Thanks for sharing the details! hugs,jackie

Felix the Crafty Cat said...

Brilliant tutorial Brenda and lovely finish. Happy crafting, Angela x

sarascloset said...

Brilliant work on this, Brenda! thank you for your wonderfully written tutorial and all the step by step photos. Great use of those DecoArt products! I just purchased some of the ones you used in a recent crackly post--now I have to go back and find it! I believe you could sell me every product you've laid your hands on, in hopes I could achieve such spectacular results!

Barbara said...

Love love love this piece! Especially your tutorial is fabulous!!! Stunning project! barbara

Rita said...

Beautiful piece Brenda. It looks so amazing too. Great tutorial too. Hugs Rita xxxx

A Pink said...

Fabulous, inspiring project . Brenda. Great design and masterfully created . Always enjoy your step by steps - thankyou. Scrolling back up to do at least one more re- run.
hugs x