Faux rust effects tutorial

I've had great fun over the last week experimenting with my Tim Holtz/Ranger products  to find ways of creating faux rust. I've wanted to to this for a long time and as it is my turn to do a Destination Inspiration post over at A Vintage Journey, I saw this as my opportunity to get right down to it. I have rusting powder in my supplies and will often take time out to do a batch of objects with it and keep them in a little box for when I need rusty bits on a project, but sometimes you want something quickly and I now have five other ways I can use the paints, inks and embossing powders on my shelf in practically no time at all. All these can be seen in detail with step by steps and photos on the AVJ blog today.

I also used a similar method in creating the rusty corners for the configuration box on my worn cover project last week which can be seen here.

Here's how I did them.

PLEASE BE CAREFUL AND AVOID BURNING YOUR FINGERS ON THE HOT METAL

Dab vintage photo distress paint and dry.

In layers, drying between them, dab on random splodges of aged mahogany, walnut stain and spiced marmalade distress paints.

Using an embossing ink pen add splatters of distress powders in tea dye, vintage photo, walnut stain.

At this point I was a little disappointed in the light tones the tea dye created so ........

Drip over a little butterscotch, honeycomb, teakwood and sunset orange alcohol inks.

Eh voila, the rusty effect was achieved.

Thanks for stopping by and if you would like to see other ways I devised for creating faux rust results from my experiments please pop over to AVJ for today's Destination Inspiration post.

Have a great week.

hugs Brenda xxx

Updated with details from AVJ

Good morning one and all it's Brenda here, I hope you are up for some serious metal work today. I've had it in my mind for ages to do this particular Destination Inspiration post because I love corroded metals and their wonderful colours. I also like to create faux metal effects, but I have a very limited number of techniques that can be used without spending lots of money on specialist supplies. So I thought I would experiment with distress products and ranger products to see what I could come up with. During my experiments I researched quite a bit about rusting and patinas and ended up focusing totally on using the products on my shelves to achieve different rusting effects. I hope you like the selection.

Rusted wooden shapes

Using distress paints and alcohol inks

Dab vintage photo distress paint onto shape and heat dry (if you get the gun close enough it will create texture bubbles which look cool for this effect).

In layers, drying between, dab on random splodges of aged mahogany, walnut stain and spiced marmalade DPs.

Using an embossing ink pen add splatters of distress powders in rusty colours I used spiced marmalade, fired brick, vintage photo and walnut stain.

Drip over a little butterscotch, honeycomb, teakwood and sunset orange (or any other rusty colours you have) alcohol inks.

These turned out a bit too shiny for me so after a quick chat with CG Jenny who has shown us metallic techniques herself I sponged over a little matt medium and dabbed over the anti static bag after it had almost dried which has given it a more muted look.

I suppose you could call this next one an out-take photo as this is the underside of the circular wooden shape above and I really like the effects of that too.

Using distress paints and cinnamon

Dab over with spiced marmalade, vintage photo and black soot distress paints. Whilst wet sprinkle over some cinnamon. (Yes ground cinnamon from the spice rack).

With a paint brush stipple the colours and cinnamon together

and finish off by dipping the cog in the left over cinnamon.

Leave to dry and if you're anything like me you will help it along with your heat gun - oh boy the workroom did smell nice.

When cool I rubbed off some of the excess powder and I think I will buy a spray matte varnish to seal it.

Using re-inkers and sprays (or stains).

Use gesso with wild honey, barn door, vintage photo and walnut stain re-inkers. With a palette knife 'splodge' colours over the shape and heat dry.

Repeat the process again to get more texture layered  again heat drying and getting some of those texture bubbles.

To finish spray spiced marmalade, vintage photo and walnut stain in separate layers drying between each until desired effect is achieved.

Using distress embossing powders.

Stain the cog with vintage photo, spiced marmalade, barn door and walnut stain sprays or stains – dry.

Add layers of vintage photo, mustard seed, spiced marmalade, fired brick, aged mahogany and walnut stain distress powders and bake them in together really well.

Add more if needed until you are happy with the effects.

Using distress paints, sprays and sand

Paint the cog with any brown, red and orange distress paints you have - I used walnut stain, aged mahogany and spiced marmalade (I now want to try with other colours in those hues).
Paint the colours on thickly and then dip the shape into ordinary fine sand and heat dry.

When cool rub off excess sand and you are left with some great texture.

Spray with vintage photo, spiced marmalade and barn door sprays. and heat dry.

With your craft knife cut a few bits of the surface away and paint the gaps with the leftover spray inks.

Now I have a whole collection to use in projects. Can you see there is a rogue cog here.

 Yes this one ......

It was one of my practice ones that came out too shiny and I added watery gesso to it and although it didn't get me the look I wanted I do like it for it's shabby appeal.

So now I have a nice little collection to use in future projects and it just goes to show you can experiment with any supplies you have in the craft room to see what works for you. I have used Tim Holtz products here, but there are lots more paints on my shelves that I can experiment with. What about you?

Have fun.

hugs Brenda xxx

Use a Portrait is the new theme at AVJ

My CG sample for the new challenge at AVJ uses several portraits in it, but how would you define a portrait?

A portrait is a painting, photograph, sculpture, or other artistic representation of a person, in which the face and its expression is predominant. The intent is to display the likeness, personality, and even the mood of the person. 


Wikipedia


1. 
   
   

I used a Tim worn cover and had great fun changing it into a place to keep photos of current and past generations of immediate family.

I dipped it in distress inks (still one of my most favourite techniques) to achieve an aged look to it.

I love the way the colours have blended and dried achieving some fabulous water damage results.

I didn't add too much to the front cover, I just like it simple as there is already quite a lot of decoration on it. (This photo was taken before I added the ribbon to tie it up). The photo is my grandmother when she was a young woman and married to my grandpa. You can see I added two small pieces of collage, some inked layers using Tim's stencils, remnant rubs and label letters.

Let's open the book and see what is inside.

Family portraits, in fact 5 generations of us girls. The large cabinet card photo is one of my grandmother when she was small and in fact I captured all of us as children. On the left hand side is my Mum at the top, Chris and I, then my daughter Maddie and my two grandchildren at the bottom.

So having decided that rather than make a journal I would add a configurations box, I lined it with Tim paper and edged it with tissue tape.

I wanted to add two corners and for them to look aged too. So I layered distress paints, drying them between coats until I was happy with the look.

My intention was to get a rusted look by using tea dye distress embossing powders (the only orangey one I have), but I was disappointed with the soft effects.

So I dripped sunshine yellow and butterscotch alcohol inks over the top.

The photograph of my grandmother was mounted onto craft card and then I adhered these two pieces of wood to the back to raise it up. Beneath the photo I added some collage pieces and  more patterned paper and elements in various places.

I dipped the inside covers in the distress inks the same as the front cover and dried them adding some random stamped text.

The circular portraits were made using Tim's reflective imagery technique, although I changed it slightly, but you can see on the girls photos the metal showing through the distressed areas, (Don't forget - embrace your imperfections).

The background is the back of a cabinet card, I had used the front previously on a project and kept this piece, so it came in very handy here.

Some additional collage pieces, chit-chat stickers and two linen ribbons to tie it up ......

..... a decorated back cover with a stamped image from Artistic Outpost.

I have enjoyed making my portrait book and I know the girls will love looking at it.

Most of the supplies I used can be bought at Country View Crafts who are the wonderful sponsor for AVJ donating a great £10 voucher for each fortnightly winner. Why don't you transport yourself over to the challenge blog to see all the wonderful inspiration from the other.Creative Guides, you won't be disappointed.

Thanks for joining me today, for taking a look at my piece and for leaving a comment if you have time.

Have a great weekend.

hugs Brenda xxx

Weekly Visual Journey

I have started a Visual Journal and as often as possible I am going to make a page and blog it, by the end of the year I hope I will have a book full of ideas, layouts, quotes, colour palettes and further design inspiration.

The first page can be found here and certainly got me started on making a ‘quick’ (well quick for me) visual collage and I certainly had to push myself into working without a plan.

I haven't entered any challenges for a long time and have decided to 'keep an eye' on a few that I know will provide me with inspiration and challenging themes that will get me back into thinking about new ideas and help me explore and practice alternative and perhaps unfamiliar ways of approaching my art. The changes at PaperArtsy certainly look exciting and I will enter this altered book with it's 'fragile' pages there.

So I have another double page spread for you.

This week I wanted to try out  a photo transfer technique and began with two tags and a photo of my daughter as a baby and one of my Mum as a young woman.

I had researched techniques and decided to go with one I had found using mod podge. But my favourite wet glue is Evo-stik wood adhesive so I experimented with that instead.

Many of the tutorials you find say you can only use laser prints but I used my trusty inkjet printer and a thin photographic paper. When the photo was dry I adhered it to the distressed tag (face down) and dried it with my heat gun. I also let it cool and left if for about half an hour to ensure it was dry.

Using some warm water I began to gently rub it into the back of the photo so that the paper rubbed away and slowly the image began to appear.

I continued to do this until I could see the image clearly.

I gave Maddie’s photo a sealing layer of the wood glue …..

….. but not with my Mum’s photo as I wanted to see the differences. I actually prefer the matte finish to the shiny finish from the glue.

I gathered some collage pieces, tissue wrap, tissue tapes, scraps of papers and borders and started to glue them down.

I have to admit I did spend some ‘thinking’ time on this one but not too much, just enough to plan the butterfly in the film strip and to find the letters and numbers I wanted to add.

So there we have it my second go at creating a collage and this time with trying out a new technique as well. I have to say I am rather pleased with it.

Thank you to Nikki, Alison, Sue and Mona for joining my blog hop and sharing your journal pages with me. You can see their contributions below as part of the link-up. I would love it if you joined in as well. I am deciding whether I keep each linky open for 2 weeks or a month, let’s see what happens before I make the decision. So it’s ‘anything goes’ with whatever journal/sketchbook/ type activity is right for you.

This is the code to add to your post so you can share the Link Up with your readers.
get the InLinkz code
Please join our Visual Journal Link Up and thank you for sharing your inspiration with us.

hugs Brenda xxx

An InLinkz Link-up