Monday 30 July 2018

Entomology board for Country View Crafts

You love them or you hate them, all those bugs in the garden but they're totally safe when stamped on a project. I have an easel board over on the CVC project blog today created with the Entomology set of stamps by Tim Holtz and my faux encaustic technique.

If you can spare a moment to pop over and see how it all came together I would love to see you there.

Thanks for stopping by here.

Updated from CVC

I got the bug for this set of stamps - please excuse the pun lol, but the little creatures called to me to use them in a project so here is an easel board and yes my faux encaustic technique again.

Cut a piece of thin greyboard and adhere a piece of designer paper - mine is from the Tim Holtz Correspondence set - using the decoupage glue and seal the top with it too. When dry mix watery media fluid acrylics in three colours and dip, drip and dry random pools of colour and heat dry between each layer so the colours don't mix and produce mud.

Next mix some watery gesso and repeat the technique again.

Stamp three of the bugs - I used Tim's stamp platform and so glad I did as I was able to give it a second stamping to get very clear and sharp images.

I used the same colour paints I had in front of me to mix blends to paint the bugs and I adhered a plate name for each of them. (See my freebies page located just under the blog header to download for you to use).

I applied a thin coat of DecoArt clear modeling paste and left it overnight to dry.

I took some white gesso and transparent yellow iron oxide media fluid acrylic and blended them together to get a very light yellow colour and with blending foam I stenciled using one of Tim's mini stencils. This began to create some depth and interest. I also added a little text stamping using the gorgeous text from the Etymology set.
I also made a watery wash with raw umber fluid acrylic and dribbled and dried some round the sides and I distressed the edges and painted them with the left overs.I splattered a white gesso/raw umber mix covering the insects to begin with so they got barely any on them. I got so involved in the process I forgot to take a photo here.
I finished with a thicker layer of the clear modeling paste.

You can see how the layers are creating some depth.

To help bring the bugs nearer to the surface again and be more prominent I drew round them and added a little of the detail with a permanent black pen and added some asemic writing in white a also a white remnant rub. To encapsulate it all and seal it I gave it another thin layer of the clear modeling paste.

To create the simple background on the canvas board I simply took phthalo green blue, transparent yellow iron oxide, titan buff, titanium white and burnt umber and blended over with a baby wipe. As areas dried off I kept adding more colour and rubbing some away with the babywipe until I had a mottled effect.

Next with a small brayer I rolled on a little of the titanium white around the edges (remember the panel will sit over the centre). You could also add some very light text stamping if you wished, but I didn't want to detract from the central panel being the main focal point.

Create a 'dirty' wash (I use different colours according to how I want it to look) I used burnt umber, raw umber and titan buff to keep it light in colour - I didn't want a really dark one. I also just finger painted and added some darker areas on a few of the edges. If the brown comes out too dark you can always rub it back with a wet wipe even after it has dried for a while.

Finish by adding an easel to the back .....

... and you're ready to send it to someone special either as a gift or add a sentiment as a special easel card.